Patch Cord 5M-Cat6E-UTP

Description

Category 6 patch cables and cross-over cables, are factory
manufactured using premium quality stranded conductor
UTP cable and low crosstalk modular plugs, are fully tested
to ensure consistent high performance.
The patch cords are suitable cabling wired in T568A or
T568B configurations. Cross-over cables are suitable for
direct hub to hub or PC to PC connections.
The Category 6 patch cables have been designed for highspeed
voice & data applications and can be used together
with Category 6 cable and accessories to construct a
channel with Category 6 performance.
Category 6 channel performance when used together with
Category 6 cable, patch panel and jacks.

APPROVALS

• Category 6 channel performance when used together with Category 6 cable, patch panel and jack.

SUPPORTED APPLICATIONS

• Voice
• ISDN: Basic & Primary Access
• Token Ring: 4/16/100 Mbps
• ATM: 25/52/155 Mbps ; 1.2 Gbps
• Ethernet: 10BASE-T; Fast Ethernet: 100BASE-TX/T2/T4; Gigabit Ethernet: 1000BASE-T
• Broadband video

MECHANICAL SPECIFICATIONS

• Plug insertion durability: ≥ 750 mating cycles
• Cable to plug tensile strength: ≥ 89N

ELECTRICAL SPECIFICATIONS

• Plug insulation resistance: ≥500MΩ
• Plug contact resistance: ≤ 10MΩ
• Plug DC resistance: ≤ 0.1Ω
• Plug current rating: ≥ 1.5A
• Plug dielectric withstanding voltage: ≥ 1KV RMS

PHYSICAL SPECIFICATIONS

• Cable diameter: 5.8 mm ± 0.2mm
• Cable conductor: 24 AWG strand bare copp er wire
• Cable sheath: PVC
• Plug/ boot material: Plug flame retardant plastic, boot PVC
• Operating temperature range: -10°C to 60° C